Greenheck SBE-1 User Manual

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Sidewall Propeller Fans

Belt and Direct Drive

Exhaust, Supply and Reversible

October

2015

Other manuals for Greenheck SBE-1

Installation, Operation And Maintenance Manual8 pages

Questions and Answers:

M
Martha VazquezAug 10, 2025
Why is my Greenheck Fan making excessive noise?
- J
  Joan BellAug 10, 2025
  Excessive noise in your Greenheck Fan can stem from several causes. Check the following: * Tighten collars and fasteners, lubricate or replace defective bearings. * Tighten pulleys, adjust belt tension, align pulleys, or replace worn belts or pulleys. * Clean dirt from the propeller, ensure all setscrews and fasteners are tight, check for worn bearings, correct propeller imbalance, and inspect for loose dampers, guards, or ductwork. * Consider replacing a defective motor. * Check the Variable Frequency Drive (VFD) settings. * Remove any debris from the fan.
F
Francisco AlvarezAug 17, 2025
What to do if my Greenheck SBE-1 Fan does not operate?
- S
  Stephanie WilsonAug 18, 2025
  If your Greenheck Fan isn't operating, start by checking the electrical supply, looking for tripped fuses/circuit breakers, disconnected switches, or incorrect supply voltage. Next, inspect the drive for broken or worn belts and tighten any loose pulleys. Finally, ensure the motor is the correct horsepower and isn't tripping the overload protector.
L
Laurie AlexanderAug 25, 2025
How to fix reduced airflow in my Greenheck SBE-1?
- T
  Timothy BakerAug 26, 2025
  Reduced airflow in your Greenheck Fan can be caused by several factors. First, check backdraft dampers for proper operation, remove obstructions in ductwork, clean dirty filters and check for adequate supply air for exhaust fans or exhaust air for supply fans. Also, increase the distance between the fan and damper if they are too close. Increase the fan speed if it is too low. Finally, clean the propeller if there is excessive dirt buildup.
J
Jennifer BlackSep 1, 2025
How to decrease airflow from my Greenheck SBE-1 Fan?
- D
  Donna JohnsonSep 1, 2025
  If your Greenheck Fan has too much airflow, it may be due to resistance being lower than designed. You can resolve this by decreasing the fan speed.

Greenheck SBE-1 Specifications

General

Brand	Greenheck
Model	SBE-1
Category	Fan
Language	English

Summary

Standard Mounting Details

Wall Mounting Dimensions

Horizontal Mounting Modifications

Filtered Supply Wall Housing

Housing Mounting and Accessories

Wall Housing and Collar Mounting

Mounting Procedures

Sidewall Options and Accessories

Guard and Weatherhood Dimensions

Collars and Housing Dimensions

Wall Collar Dimensions

Wall Housing Dimensions

Direct Drive Dimensional Data

Direct Drive Performance Data

Dimensional measurements for S1, S2, SC3, SCR3 models.

Belt Drive Dimensional Data

Belt Drive Performance Data

Dimensional measurements for SB and SBCR models.

Vari-Green® Motor Options

Motor Features and Information

Vari-Green® Motor Benefits

Motor Benefits and Advantages

SE1 Performance Limits

CFM/Static Pressure data for SE1 models.

Model Number Coding

Direct Drive Coding

Belt Drive Coding

S1 Direct Drive Performance

SE1/SS1 Performance Limits

CFM/Static Pressure data for S1/SS1 models.

S2 Direct Drive Performance

SE2 / SS2 Performance Limits

CFM/Static Pressure data for S2/SS2 models.

SC3 Direct Drive Performance

SCE3/SCS3 Performance Limits

CFM/Static Pressure data for SC3/SCS3 models.

SCR3 Direct Drive Performance

Reversible Performance Limits

CFM/Static Pressure data for SCR3 models.

Belt Drive Performance Tables

SB-20 Belt Drive Performance

SB-30 Belt Drive Performance

SB-36 Belt Drive Performance

SB-42 Belt Drive Performance

SB-48 Belt Drive Performance

SB-54 Belt Drive Performance

Level 1 & 2 Performance Data

CFM/Static Pressure for SB-1 and SB-2 models.

Level 3 Performance Data

CFM/Static Pressure for SB-3 models.

SB-60 Belt Drive Performance

Level 2 & 3 Performance Data

CFM/Static Pressure for SB-2 and SB-3 models.

SBC Belt Drive Performance

24 & 30 Performance Data

CFM/Static Pressure for SBC-24 and SBC-30 models.

36 & 42 Performance Data

CFM/Static Pressure for SBC-36 and SBC-42 models.

48 & 54 Performance Data

CFM/Static Pressure for SBC-48 and SBC-54 models.

60 & 72 Performance Data

CFM/Static Pressure for SBC-60 and SBC-72 models.

SBCR Belt Drive Performance

24-42 Performance Data

CFM/Static Pressure for SBCR-24, -30, -36, -42 models.

48-72 Performance Data

CFM/Static Pressure for SBCR-48, -60, -72 models.

Specifications

Belt Drive Specifications

Reversible Direct Drive Specifications

Reversible Belt Drive Specifications

Vari-Green® Motor Specifications

Direct Drive Specifications

Related product manuals

Greenheck SBE-3

Preview: Greenheck SQ

Preview: Greenheck SE-1

Greenheck SDPE-D

Greenheck SP-A125

Preview: Greenheck SP Series

Greenheck SP Series

Preview: Greenheck SP-AP0511W

Greenheck SP-AP0511W