To Next Page
L
Louis EvansAug 3, 2025
What to do if the cutting line does not advance on my GreenWorks Trimmer?
- LleonardfletcherAug 3, 2025
If the cutting line on your GreenWorks Trimmer isn't advancing, it could be due to a couple of reasons. First, the line might be tangled on the spool. To fix this, remove the battery, then remove the spool cover and the spool itself. Unwind the spool, make sure the line isn't tangled, and rewind it. Alternatively, the line may have run out, in that case follow the steps for a tangled line and replace the spool or spool line.
General
