GreenWorks 21272 - Electrical

9
ELECTRICAL
W A R N I N G
KEEP THE EXTENSION CORD CLEAR OF THE STRING HEAD AND WORKING AREA.
POSITION THE CORD SO THAT IT WILL NOT GET CAUGHT ON LUMBER, TOOLS OR
OTHER OBSTRUCTIONS WHILE yOU ARE WORKING WITH A STRING TRIMMER. FAILURE
TO DO SO CAN RESULT IN SERIOUS PERSONAL INJURY.
W A R N I N G
CHECK EXTENSION CORDS BEFORE EACH USE. IF DAMAGED REPLACE IMMEDIATELy.
NEVER USE TOOL WITH A DAMAGED CORD SINCE TOUCHING THE DAMAGED AREA
COULD CAUSE ELECTRICAL SHOCK RESULTING IN SERIOUS INJURY.
When working with the tool outdoors, use an extension cord that is designed for outside use.
This is indicated by the letters “WA” on the cord’s jacket.
Before using an extension cord, inspect it for loose or exposed wires and cut or worn insulation.
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
(WHEN USING 120V ONLY)
Amp Rating Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
**Ampere rating (on tool faceplate)