EasyManua.ls Logo

GreenWorks 29482 - Troubleshooting; Charger Not Working Issues; Battery Temperature Issues

GreenWorks 29482
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
TROUBLESHOOTING
11
PROBLEM CAUSE SOLUTION
Charger doesn't work. Charger
shows defective mode. (LED
ashes Red)
Battery pack or charger is
defective or there is a bad
connection between the battery
pack and charger.
1. Try to remove and reinsert
the battery pack in the charger.
2. Try charging a different
battery pack.
3. Unplug the charger and wait
until the red LED goes out,
then reconnect the plug to the
power supply.
Charger doesn't work. Charger
shows evaluation mode (LED
indicates Red solid ON).
Battery pack is either too hot,
or too cold.
Allow the battery pack to reach
normal temperature. Charging
will begin when the battery
pack returns to 3°C-47°C
(37°F-117°F).

Related product manuals