GreenWorks 51152 - Page 24

24
TROUBLESHOOTING
PROBLEM
Output pressure varies
high and low. (contin-
ued)
Detergent is not
coming out.
Pump is noisy
Water leaks from pump
(up to 10 drops per min-
ute is permissible).
Oil is dripping
Spray wand, extension,
or nozzle leaks.
Garden hose connection
leaks.
POSSIBLE CAUSE
Discharge nozzle is ob-
structed.
nozzle.
Is detergent tank seletor on
and the correct tank slected?
Detergent bottle or suction
tube not properly connected.
Detergent is too thick.
Filter on detergent suction
tube is clogged.
Damaged or clogged deter-
gent suction tube.
Nozzle is in high-pressure
position.
Discharge nozzle is ob-
structed.
Pump is sucking air
Water seals are damaged or
worn.
Oil seals are damaged or
worn.
Broken o-ring or plastic insert.
Missing/worn rubber washer.
SOLUTION
Blow out or remove debris with a
Run distilled vinegar through
detergent tank.
Select the correct tank, either
A or B.
Check connections.
Dilute detergent.
remove build-up.
Remove obstruction or replace
detergent suction tube.
Turn nozzle tip to low-pressure
position.
Blow out or remove debris with a
airtight. Turn off machine and
purge pump by squeezing trigger
emerges through the nozzle.
warm water.
Call the Toll-Free Hotline
Call the Toll-Free Hotline
Insert new washer.
Call the Toll-Free Hotline.