Need help?Do you have a question about the GreenWorks CS40B00 and is the answer not in the manual?
General| Voltage | 40V |
|---|---|
| Bar Length | 16 inches |
| Weight | 10.4 lbs |
| Battery Included | No |
| Power Source | Battery |
| Type | Chainsaw |
| Chain Gauge | 0.05 inches |
Keep work area clean and well lit, avoid explosive atmospheres, and keep bystanders away.
Do not expose power tools to rain or wet conditions to avoid electric shock risk.
Stay alert, use common sense, wear protective equipment, and prevent unintentional starting.
Use the correct power tool for the job and maintain it properly to ensure safe operation.
Recharge only with specified chargers and handle batteries carefully to prevent damage or fire.
Have power tools serviced by qualified personnel using identical replacement parts.
Keep body parts away from the chain, maintain proper grip, and use caution during operation.
Understand kickback causes like tip contact and pinching, and use proper handling to prevent it.
Open package, read documentation, remove parts, and discard packing material responsibly.
Examine oil level and add appropriate bar and chain oil to the tank.
Align battery pack ribs with compartment grooves and push until it locks into place.
Push and hold the battery release button and remove the battery pack from the machine.
Check the oil level using the indicator and add oil if necessary before use.
Grip the chainsaw firmly with both hands, ensuring proper hand placement for control.
Press the lock-out button, then press the trigger while holding the lock-out button.
Release the trigger to stop the machine's operation.
Prepare the felling area, make notch and felling cuts correctly, and use a wedge for safe fall.
Remove branches from a fallen tree, supporting the log and cutting limbs from bottom to top.
Cut a log into desired lengths, ensuring secure footing and proper cutting technique.
Loosen chain cover, remove old chain and bar, install new ones, and tension chain properly.
Regularly adjust chain tension to remove slack, ensuring it can be pulled from the bar center.
Sharpen cutters with appropriate files when the chain does not cut into wood easily.
Periodically turn the bar, lubricate nose sprocket, clean groove and holes, and remove burrs.
To Next Page