GreenWorks 20222 - User Manual

GreenWorks 20222

45 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

P0801275-00

P0801275-00

1800W chainsaw

20222

技术要求：

2.44P, 内容见电子档；

3.单色印刷，要求无色差、无污点；

4.骑马钉，裁切均匀、无连页；

5.以封样为准；

6.料件需符合格力博HSF文件(编号：GLB-CGR-146) 里关于环保和有害物质的具体要求。

1.材质要求：60g双胶纸

常州格力博集团

说明书

刘小娟

黄潇笑

周艳

宋提提

李海平

200212

版本号

描复

日期

工艺

审核

校对

设计

标记

处数

签名

日期

阶段标记

视角标记

重量比例

批准

审定

标准化

日期

更改文件号

SCALE: A5

210mm

145mm

A B

B

CSA801

20222

EN OPERATOR MANUALCHAINSAW

FR MANUEL D’OPÉRATEURTRONÇONNEUSE

ES MANUAL DEL OPERADORSIERRA DE CADENA

www.greenworkstools.com

Table of Contents

Questions and Answers

A
Amy ChavezJul 28, 2025
Why GreenWorks 20222 Chainsaw motor runs but chain not rotating?
- O
  ocoxJul 28, 2025
  If the GreenWorks Chainsaw motor runs but the chain doesn't rotate, it could be due to several reasons. First, the chain might be too tight, in which case you should adjust the chain tension. Second, the guide bar or the chain could be damaged, requiring replacement. Finally, the motor itself might be damaged. To check the motor, unplug the chainsaw, remove the guide bar cover, bar, and chain, clean the machine, and restart it. If the sprocket rotates, the motor is fine; otherwise, call a service center.
M
Michael GreenAug 3, 2025
What to do if GreenWorks 20222 Chainsaw chain rotates but doesn't cut?
- A
  Ashlee HughesAug 3, 2025
  If your GreenWorks Chainsaw's motor runs and the chain rotates but doesn't cut, the chain might be blunt and needs sharpening or replacement. Another possibility is that the chain is installed in the incorrect direction; in this case, turn the chain loop to the other direction. Finally, the chain tension might be too tight or too loose, requiring adjustment.
B
bbyrdAug 10, 2025
Why GreenWorks 20222 bar and chain get hot and smoke?
- S
  smithmichaelAug 10, 2025
  If the guide bar and chain on your GreenWorks Chainsaw are getting hot and releasing smoke, several issues could be the cause. The chain may be too tight, so adjust the tension. The oil tank might be empty, so add lubricant. There may be a blockage of the discharge port, oil tank, guide bar, oil tank cap, sprocket, or guide wheels due to contamination. To resolve this, remove the guide bar and clean the discharge port, clean the oil tank and add new lubricant, clean the guide bar and the oil tank cap, and clean the sprocket and the guide wheels.
M
Marvin JosephAug 15, 2025
What to do if GreenWorks 20222 Chainsaw chain doesn't cut well or motor stops?
- W
  wvasquezAug 15, 2025
  If the GreenWorks Chainsaw motor runs but the chain doesn't cut correctly, or if the motor stops after a few seconds, it could be in protection mode to protect the PCB. Try releasing the trigger and starting the machine again, and avoid forcing it to cut. Another cause might be that the chain isn't lubricated properly, so make sure to lubricate the chain to decrease friction and prevent operation without sufficient lubricant.
T
tiffanyhuberAug 21, 2025
How to start GreenWorks Chainsaw?
- M
  Megan KleinAug 21, 2025
  The GreenWorks Chainsaw may not start if the lock-out button and the trigger are not pushed simultaneously. To start the chainsaw, push and hold the lock-out button, then push the trigger.

Summary

General Power Tool Safety Warnings

Work Area Safety

Advises on maintaining a clean, well-lit work area and avoiding explosive atmospheres.

Electrical Safety

Covers plug compatibility, grounding, avoiding wet conditions, and proper cord usage.

Personal Safety

Chainsaw Safety Warnings

Prevent Operator Kickback

Operation

Hold the Machine

Start the Machine

Fell a Tree

Provides preliminary recommendations for felling trees.

Limb a Tree

Buck a Log

Maintenance

Adjust the Chain Tension

Explains how to adjust the chain tension for optimal performance and safety.

Sharpen the Cutters

Guide Bar Maintenance

Troubleshooting

GreenWorks 20222 Specifications

General

Brand	GreenWorks
Model	20222
Category	Chainsaw
Language	English

Related product manuals

GreenWorks 20202

Preview: GreenWorks 20242

GreenWorks 20242

Preview: GreenWorks 20022

GreenWorks 20022

Preview: GreenWorks 20152

GreenWorks 20152

Preview: GreenWorks 20312

GreenWorks 20312

Preview: GreenWorks CSA801

GreenWorks CSA801

Preview: GreenWorks CSF403

GreenWorks CSF403

Preview: GreenWorks GS 110

GreenWorks GS 110

Preview: GreenWorks CS40B00

GreenWorks CS40B00

GreenWorks GD40CS18

Preview: GreenWorks GCS80420

GreenWorks GCS80420

Preview: GreenWorks GD40CS40

GreenWorks GD40CS40