To Next PageTo Next PageWhat to do if GreenWorks 20312 motor runs, but chain is not rotating?
If the GreenWorks Chainsaw motor runs, but the chain isn't rotating, the chain tension might be too tight. Check the guide bar and chain assembly and retention the chain. Inspect guide bar and chain for damage.
What to do if GreenWorks Chainsaw motor runs, chain rotates but does not cut?
If the GreenWorks Chainsaw's motor runs and the chain rotates but doesn't cut, the chain may be dull and require sharpening. Alternatively, the chain might be on backwards and needs to be reversed.
Why is my GreenWorks 20312 bar and chain running hot and smoking?
If the bar and chain on your GreenWorks Chainsaw are running hot and smoking, it could be due to the chain being overtightened. Tension the chain. Another possible cause is an empty chain oil tank, so check the oil tank.
General| Model Number | 20312 |
|---|---|
| Bar Length | 12 inches |
| Voltage | 40V |
| Battery Included | Yes |
| Warranty | 4 years |
| Charger Included | Yes |
Detailed technical specifications for the chainsaw model, including bar length, chain pitch, and motor type.
Essential guidelines for safe operation of the chainsaw, covering general precautions and user responsibilities.
Explanation of kickback phenomena and methods to avoid this dangerous reaction during use.
Information on using and maintaining low kickback chains for reduced risk during operation.
Explanation of various symbols used on the product for user understanding and safe operation.
Definitions of danger, warning, and caution signal words to indicate hazard levels.
Identification and description of the main parts of the chainsaw for user familiarity.
Procedures for unpacking the product and verifying all included parts against the packing list.
Listed purposes for which the chainsaw can be used, such as limbing and felling.
Instructions for filling the oil reservoir for proper chain lubrication.
General information about the battery pack and its initial charging requirements.
Step-by-step guide on how to safely detach the battery pack from the tool.
Step-by-step guide on how to securely attach the battery pack to the tool.
Instructions on how to safely start and stop the chainsaw operation.
How to engage and disengage the chain brake for enhanced safety during use.
Techniques for holding the chainsaw handles securely for optimal control.
Guidelines for body positioning and balance during cutting operations.
Step-by-step guide for performing fundamental cutting tasks.
Safety measures concerning the cutting environment and bystanders.
Warnings and essential advice for safely felling trees.
Detailed steps and considerations for performing tree felling correctly.
Procedure for removing large buttress roots prior to tree felling.
Terminology and basic approach to cutting fallen trees into desired lengths.
Various methods for bucking logs and safety tips for different situations.
Instructions for removing branches from fallen or live trees.
Warnings and procedures for safely cutting springpoles.
Guidelines for cleaning plastic parts and general upkeep of the tool.
Details on bearing lubrication and the absence of user-required lubrication for the unit.
Instructions and safety precautions for replacing the guide bar and chain.
Step-by-step guide for properly tensioning the saw chain for optimal performance.
How to maintain chain sharpness and the importance of low-kickback chains.
Detailed instructions on how to sharpen the chainsaw cutters for effective cutting.
Correct angles for filing the top plate of the cutters for optimal performance.
Correct angles for side plates and how to adjust depth gauges.
Tips for cleaning, reversing, and replacing the guide bar for maximum life.
Instructions for the safe and environmentally responsible disposal of Lithium-ion batteries.
A table listing common issues and their recommended solutions for troubleshooting.
Details on the product's warranty period, coverage, and items not covered.
A visual representation of the chainsaw components with numbered parts for identification.
A list of all chainsaw parts with item numbers and part numbers.
Continuation of the parts list with additional component identification and quantities.
