What to do if GreenWorks 20152 motor runs, but chain is not rotating?
If the GreenWorks Chainsaw motor runs, but the chain isn't rotating, the chain tension might be too tight. Check the guide bar and chain assembly and retention the chain. Inspect guide bar and chain for damage.
What to do if GreenWorks 20152 Chainsaw motor runs, chain rotates but does not cut?
If the GreenWorks Chainsaw's motor runs and the chain rotates but doesn't cut, the chain may be dull and require sharpening. Alternatively, the chain might be on backwards and needs to be reversed.
Why is my GreenWorks 20152 bar and chain running hot and smoking?
If the bar and chain on your GreenWorks Chainsaw are running hot and smoking, it could be due to the chain being overtightened. Tension the chain. Another possible cause is an empty chain oil tank, so check the oil tank.
Comprehensive guidelines for safe operation and potential hazards.
Explains kickback, its causes, and how to prevent it.
Lists the intended uses and purposes for the chainsaw.
Instructions on how to fill the oil reservoir for lubrication.
Covers battery charging, installation, and removal.
Details on how to install the battery and start/stop the saw.
How to engage and disengage the safety chain brake.
Guidance on holding the saw and maintaining a stable cutting position.
Steps for making cuts and safety rules for the work area.
Warnings related to felling trees and general procedures.
Detailed steps for felling trees, including notches and backcuts.
How to remove roots and cut logs into lengths.
Various methods for cutting logs, including under stress and with wedges.
Instructions for removing branches from fallen or live trees.
Safety precautions and methods for cutting springpoles.
Cleaning, solvent use, and lubrication guidelines.
Step-by-step guide for changing the bar and chain.
How to properly tension the saw chain for optimal performance.
Importance of chain maintenance and sharpening.
Detailed instructions on filing and sharpening chain cutters.
Correct angles for filing chain cutters for optimal performance.
Adjusting depth gauges and side plate angles for proper cutting.
How to clean, inspect, and maintain the guide bar for longevity.
General| Type | Cordless Chainsaw |
|---|---|
| Bar Length | 16 inches |
| Motor Power | 40V |
| Chain Speed | 12.5 m/s |
| Voltage | 40V |
| Power Source | Battery |
| Battery Included | Yes |
| Charger Included | Yes |
To Next Page