1 Description.................................... 4
1.1 Purpose......................................................4
1.2 Overview.................................................... 4
2 Safety............................................ 4
3 Installation..................................... 4
3.1 Unpack the machine...................................4
3.2 Attach the guard.........................................4
3.3 Attach the edge guide................................ 4
3.4 Assemble the shaft.....................................5
3.5 Attach the auxiliary handle......................... 5
3.6 Install the battery pack............................... 5
3.7 Remove the battery pack........................... 5
4 Operation.......................................5
4.1 Controls......................................................5
4.2 Start the machine....................................... 5
4.3 Stop the machine....................................... 5
4.4 Adjust the length of the cutting line............ 5
4.5 Adjust the cutting diameter.........................5
4.6 Line cut-off blade........................................5
4.7 Operation tips.............................................6
4.8 Cutting tips................................................. 6
5 Maintenance..................................6
5.1 General information....................................6
5.2 Clean the machine..................................... 6
5.3 Replace the spool.......................................6
5.4 Replace the cutting line..............................6
5.5 Replace the bump knob............................. 7
6 Transportation and storage........... 7
6.1 Move the machine......................................7
6.2 Store the machine...................................... 7
7 Troubleshooting.............................7
8 Technical data...............................8
9 Warranty........................................9
10 EC Declaration of conformity.........9
3
English
EN
To Next Page
Loading...
