GreenWorks MO40L4413 - Remove the Battery Pack; Operation; Start the Machine; Stop the Machine

7.5 INSTALL THE MULCH PLUG
7
11
1. Remove the grass catcher.
2. Open the rear discharge door (7) and hold it.
3. Hold the mulch plug (11) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.6 INSTALL THE SIDE DISCHARGE
CHUTE
17
12
CAUTION
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
1. Open the side discharge door (17) and hold it.
2. Line up the recesses of the side discharge chute (12)
below the pivot.
3. Close the side discharge door.
7.7 SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
8
1. Pull the height adjustment lever (8) rearward to increase
the cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
7.8 INSTALL THE BATTERY PACK
9
19
20
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
10
English
EN