MAINTENANCE
21
GENERAL MAINTENANCE
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use clean cloths
to remove dirt, dust, oil, and grease, etc.
• Do not at any time let brake uids, gasoline, petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic, which
may result in serious personal injury.
• All pole saw service, other than the items listed in the instruction manual maintenance
instructions, should be performed by authorized service centers.
WARNING
• When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
• Always wear safety goggles or safety glasses with side shields during power tool operation or
when blowing dust. If operation is dusty, also wear a dust mask.
• Before inspecting, cleaning or servicing the unit, stop the motor, wait for all moving parts to
stop, and remove the battery. Failure to follow these instructions can result in serious personal
injury or property damage.
To Next Page
Loading...
