GreenWorks UTV800 - Page 23

23
0093 Encoder LOS (Limited
Operating Strategy)
Cycle KSI or, if LOS mode was activated by the
Stall Fault, clear by ensuring encoder senses proper
operation, Motor RPM = 0, and Throttle Command = 0.
0094 EMR Rev Timeout Turn the emergency reverse input Off.
0098 Illegal Model Number Download appropriate software for your controller
model.
1100 Battery OverTemp Alarm Fault 1.Cycle KSI.
2.Replace battery and contact dealer.
1200 Battery UnderTemp Alarm
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
1300 Battery OverTemp Alarm Fault 1.Cycle KSI.
2.Replace battery and contact dealer.
1400 Battery Cell OverTemp Alarm
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
1500 Battery Cell OverTemp Alarm
Fault
"1.Cycle KSI.
2.Replace battery and contact dealer.
1600 Battery Serious Insulation
Alarm Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
1700 Battery OverCurrent Alarm
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
2100 Battery OverTemp Stop Fault "1.Cycle KSI.
2.Replace battery and contact dealer.
2200 Battery UnderTemp Stop Fault 1.Cycle KSI.
2.Replace battery and contact dealer.
2300 Battery OverTemp Stop Fault 1.Cycle KSI.
2.Replace battery and contact dealer.
2400 Battery Cell OverTemp Stop
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
2500 Battery Cell OverTemp Stop
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
2600 Battery Serious Insulation Stop
Fault
1.Cycle KSI.
2.Replace battery and contact dealer.
2700 Battery OverCurrent Stop Fault 1.Cycle KSI.
2.Replace battery and contact dealer.
2800 Hardware Fault. 1.Cycle KSI.
2.Replace battery and contact dealer.
NOTE: If the fault code shows "1654", it means a combination of 2 fault codes: "1600"+"0054".
FAULT CODE