GREER Company MICROGUARD 434 Calibration Manual

GREER COMPANY
GREER COMPANYGREER COMPANY
GREER COMPANY
Crane Systems
Crane SystemsCrane Systems
Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
7
OF
39
NUMBER ENTRY
NUMBER ENTRY NUMBER ENTRY
NUMBER ENTRY
(continued)
THE FOLLOWING STEPS ILLUSTRATE THE NUMBER ENTRY PROCEDURE
THE FOLLOWING STEPS ILLUSTRATE THE NUMBER ENTRY PROCEDURETHE FOLLOWING STEPS ILLUSTRATE THE NUMBER ENTRY PROCEDURE
THE FOLLOWING STEPS ILLUSTRATE THE NUMBER ENTRY PROCEDURE
WHEN COMPLETED, THE NUMBER SHOULD READ
WHEN COMPLETED, THE NUMBER SHOULD READ WHEN COMPLETED, THE NUMBER SHOULD READ
WHEN COMPLETED, THE NUMBER SHOULD READ
-
--
-123.45
123.45123.45
123.45
PRESS THE ARROW KEY
PRESS THE ARROW KEY PRESS THE ARROW KEY
PRESS THE ARROW KEY NEAREST THE REQUIRED
NEAREST THE REQUIREDNEAREST THE REQUIRED
NEAREST THE REQUIRED SELECTION
SELECTION SELECTION
SELECTION
UNTIL BRACKETS SU
UNTIL BRACKETS SUUNTIL BRACKETS SU
UNTIL BRACKETS SURROUNDTHE SELECTION.
RROUNDTHE SELECTION.RROUNDTHE SELECTION.
RROUNDTHE SELECTION.
PRESS TOP LEFT ARROW
PRESS TOP LEFT ARROWPRESS TOP LEFT ARROW
PRESS TOP LEFT ARROW KEY TO ENTER THE DA
KEY TO ENTER THE DA KEY TO ENTER THE DA
KEY TO ENTER THE DATA.
TA.TA.
TA.
1. SELECT THE MINUS SIGN
<



>
2. ENTER THE MINUS SIGN
3. SELECT THE FIRST DIGIT
< 1 >
4. ENTER THE FIRST DIGIT
5. SELECT THE SECOND DIGIT
< 2 >
6. ENTER THE SECOND DIGIT
7. SELECT THE THIRD DIGIT
< 3 >
8. ENTER THE THIRD DIGIT
9. SELECT THE DECIMAL POINT
<
•
>
10. ENTER THE DECIMAL POINT
11. CHOOSE THE FIRST DECIMAL PLACE
<
4
>
12. ENTER THE FIRST DECIMAL PLACE
13. CONFIRM
<
4
>
AND COMPLETE
< 1 >
THE CALIBRATION

GREER Company MICROGUARD 434 Specifications

General

Brand	GREER Company
Model	MICROGUARD 434
Category	Monitor
Language	English