Page 25
PDFM 5.1 Portable Doppler Flow Meter
SPECIFICATIONS
Flow Rate Range: ± 0.1 to 40 ft/sec (± 0.03 to 12.2
m/sec) in most applications
Pipe Size: Ultrasonic Sensor mounts on any
pipe from 1/2" to 180" ID (12.5 mm
to 4.5m)
Display: White, backlit matrix - displays
flow rate, totalizer, operating mode
and calibration menu
Power Input: Built-in NiMH battery for up to 18
hours continuous operation
External charger with 100-
240VAC 50/60Hz input
Outputs: 4-20mA (500 ohm) when AC
powered
USB for Data Log transfer by
direct PC connection
Data Logger: Programmable 300,000 data point
capacity, time and date stamped
or formatted flow reports including total, average, minimum, maximum
and times of occurrence
PC Software: 'Greyline Logger' for Windows 98 or higher. Retrieves, displays and
saves data log files
Electronics Operating
Temperature: -10° to 140°F (-23° to 60°C)
Electronics Enclosure: Portable, ABS enclosure
Carry Case: Rated IP67 with protective molded foam insert
Accuracy: ±2% of full scale, requires solids or bubbles minimum size of 100
microns, minimum concentration 75 ppm. Repeatability: ±0.25%,
Linearity: ±0.5%
Calibration: Built-in 5-key programming with user-friendly calibration menu.
Password protected.
Language Selection: English, French, Spanish
Sensitivity: Adjustable signal cut-off, signal strength and damping
Approvals: Charger is CE and UL approved. The PDFM 5.1 is not certified for use
in hazardous rated locations.
To Next Page
Loading...
