DG Spin
Operating Procedure
6-2
CAUTION!
The direction of centrifugation is important to
standardise the work and make centrifugation
conditions of the cards uniform.
Consequently, place the
DG Gel
cards in such a
way that the bar code coincides with the
barcode symbolised in the Card holder as
shown by Figure 8.
Figure 8 : Cards orientation in the Card holders
NOTE:
The
DG Spin
centrifuge can work with
interchangeable
DG Spin
Head available as
accessory (Code 210364). The use of more
than one
DG Spin
Head enables improving the
performance of the equipment. In other words,
the OPERATOR may prepare a second
DG Spin
Head with new cards whilst centrifugation of a
prior batch is in progress.
For the use of different
DG Spin
Head, no
special installation or configuration is
necessary.
To Next Page
Loading...