GRIFOLS DG Spin - 7 Maintenance; 7.1 Maintenance Plan, Cleaning, and Decontamination

DG Spin Maintenance
7-1
7 MAINTENANCE
Maintenance of the DG Spin centrifuge only includes cleaning and
decontamination.
7.1 Maintenance plan
Maintenance is a set of operations carried out at regular intervals to preserve
function of the
DG Spin centrifuge.
As a general rule and as long as there is no irregularity in the operation of the
equipment, the maintenance plan that should be followed is the following:
PERIOD ACTIVITY CARRIED OUT BY
Whenever drops of
samples or other
substances split on the
Centrifugation
chamber or on the
DG
Spin
Head
Cleaning of the Chamber and the
DG Spin Head as indicated in
section 7.1.1 “Cleaning
procedures”.
RESPONSIBLE
AUTHORITY /
OPERATOR
Each month
Decontamination of the
equipment as indicated in
section 7.1.2. “Decontaminant
liquids”.
RESPONSIBLE
AUTHORITY /
OPERATOR
Decontamination operations carried out by the OPERATOR or interventions
carried out by a QUALIFIED TECHNICIAN should be noted in the "Maintenance
services carried out" register included at the end of these Instructions for Use.
Technical assistance may be provided by your supplier or other Technical Services
authorised by Diagnostic Grifols, S.A.
DANGER!
During cleaning and/or decontamination
processes, protective gloves must be used by
the OPERATOR.