EasyManua.ls Logo

Grillo FX 27 - Identification and Servicing; Machine Identification, Servicing, Spare Parts, and Warranty; Technical Specifications

Grillo FX 27
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 30 -
IDENTIFICATION AND SERVICING
IDENTIFICATION
The Grillo FX27 is provided with an ID plate showing the serial number, located on the side
of the chassis.
SERVICING
This handbook provides the instructions for using the lawnmower. For a correct basis
maintenance contact your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and
interchangeability. Each order should include the machine serial number and the code of
the spare part needed. For engine spares, refers to the information in the specific manual.
WARRANTY
The warranty is given in compliance with the current law. The dealer will have to give the
client a copy of the registration card of the machine, which they will print up from the Grillo
website.
For the engine the guarantee of the relative manufacturers apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
N. 1 set of lawnmower blades
N. 1 set of belts
N. 1 engine air filter
N. 1 engine oil filter
N. 1 throttle cable
N. 1 set of electrical equipment fuses
HOW TO ORDER SPARE PARTS
Always state the machine serial number and the code of the spare part needed. Contact
your retailer for spare parts.
TECHNICAL SPECIFICATIONS
MODEL: hydrostatic lawnmower with front cutting deck.
ENGINE: BRIGGS&STRATTON Series 8, petrol 724 cm³ (27 HP, 20,1 kW), twin-cylinders,
equipped with a
CYCLONIC air filter.
FUEL TANK: 2×15 litres.
HYDRAULIC OIL TANK: 700 ml.
HOURLY CONSUMPTION: about 4,6 litres.
STARTER: electric 12V.
TRACTION: hydraulic, 2 wheel drive.
MACHINE STABILITY DEVICE ON SLOPES

Related product manuals