Grillo FX 27 User Manual

- 42 -
FX27 ROUTINE MAINTENANCE GUIDE
This table is intended to help you to keep your machine in good, safe working order. It lists
the main maintenance and lubrication procedures with the frequencies at which they are
required; alongside each one, you will find a series of boxes where you can note the date or
the number of operating hours when the procedure was carried out.
CAUTION! Perform the first general inspection after the running-in period (the first 8 working
hours). Daily check the engine oil level and clean the air filter, in dusty conditions or when
airborne debris is present clean it more often. Then follow the table below:
PROCEDURE
HOURS
CHECKED (DATE/HOURS)
1.0 RUNNING-IN
▼
1.1 Check and replace engine oil
and filter
8
1.2 Check hydraulic oil level
8
1.3 Check and clean engine air
filter
8
1.4 Adjust PTO belts tension
8
1.5 Replace oil and filter in the
hydraulic transmission circuit
40
2.0 PERIODIC MAINTENANCE
every
2.1 Check and clean engine air
filter
8
2.2 Check blade(s) fixing and
sharpness
40
2.3 Check general safety devices
40
2.4 Check and adjust stop position
40
2.5 Check all fasteners
40
2.6 Check tyre pressure
40
2.7 Grease lubrication points
40
2.8 Replace engine oil
100
2.9 Check and adjust PTO belt
tensioner
130
3.0 Check battery
130
3.1 Check and clean petrol filter
200
3.2 Replace engine oil
200
3.3 Replace oil and filter in the
hydraulic transmission circuit
200
3.4 Replace engine air filter
250
Refer to the engine handbook for the complete list and relative procedures.
General lubrication is strongly recommended whenever the machine is to be out of use for
a long period.
CAUTION! Do not clean the machine with a high-pressure water cleaner; use it only for the
deck, grass catcher and grass intake duct.

Grillo FX 27 Specifications

General

Brand	Grillo
Model	FX 27
Category	Lawn Mower
Language	English