Need help?Do you have a question about the Grindex Minette and is the answer not in the manual?
Details conditions for product warranty and coverage exclusions for faults caused by improper use or maintenance.
Explains the meaning of various symbols and codes found on the pump's data plate for identification and specification.
Outlines essential safety precautions, symbols, and measures to prevent accidents during operation and maintenance.
Specifies compliance with government regulations, local codes, and electrical safety for safe pump operation.
Provides motor types, ratings, and current/voltage specifications for 1-phase and 3-phase operation at 50/60 Hz.
Emphasizes electrical safety, proper grounding, and correct connection procedures for the pump and monitoring equipment.
Covers essential checks before starting the pump, including oil level, impeller rotation, and handling the starting jerk.
Provides a step-by-step guide for changing the pump oil, recommending specific lubricant types and emphasizing O-ring replacement.
Outlines the process for removing the pump strainer, locking the impeller, and disassembling the impeller screw and diffuser part.
Details preparing the shaft, greasing components, and aligning the adjustment screw for proper impeller installation.
Describes mounting the diffuser part, setting impeller clearance with an adjustment screw, and tightening the impeller screw and strainer.
General| Model | Minette |
|---|---|
| Type | Submersible Pump |
| Power | 0.85 kW |
| Weight | 14 kg |
| Maximum Liquid Temperature | 40°C |
| Motor Protection | IP 68 |
| Frequency | 50 Hz |
| Max Flow Rate | 200 l/min |
| Voltage | 230 V |
To Next Page
