To Next PageTo Next PageWhy is my Grizzly Lawn Mower engine overheating?
Your Grizzly Lawn Mower engine might be overheating due to several reasons. Check if the ventilation holes are blocked and clean them if necessary. An incorrect spark plug can also cause overheating, so replace it. Also, ensure there's enough engine oil; if it's low, fill it up.
What to do if Grizzly BRM 4210-20 Lawn Mower starts but doesn't run at full power?
If your Grizzly Lawn Mower starts but doesn't run at full power, a dirty air filter could be the cause. Replace the air filter. It is also possible that the carburetor mix is incorrectly adjusted, in that case you should have it adjusted by a specialist workshop.
Why does my Grizzly BRM 4210-20 Lawn Mower engine smoke?
If your Grizzly Lawn Mower engine is smoking, it could be due to a dirty air filter. Replacing the air filter might solve the problem. Another possible cause is too little engine oil; ensure you fill it to the correct level.
What to do if my Grizzly Lawn Mower engine does not start?
If your Grizzly Lawn Mower engine isn't starting, check the spark plug connector to ensure it's properly attached. Also, the spark plug might be sooted, requiring cleaning, adjustment, or replacement. If the carburettor mix is incorrectly adjusted, have it adjusted by a specialist workshop.
Why is my Grizzly Lawn Mower's output unsatisfactory?
If your Grizzly Lawn Mower's output is unsatisfactory or the engine is labouring, the grass might be too short or too long. Adjust the cutting height accordingly. Also, check if the blade is blocked with grass, the grass collection box is full, or the ejection channel is blocked; remove any obstructions.
What causes a Grizzly BRM 4210-20 Lawn Mower engine to sputter and stop?
If your Grizzly Lawn Mower engine sputters and stops, it could be due to a sooted spark plug. Clean, adjust, or replace the spark plugs. It is also possible that the carburetor mix is incorrectly adjusted, in that case you should have it adjusted by a specialist workshop.
What to do if my Grizzly Lawn Mower's output is unsatisfactory?
If your Grizzly Lawn Mower's output is unsatisfactory or the engine is labouring, it could be because the blade is blunt. Have the blade sharpened or replaced by a specialist workshop.
What to do if the blade on my Grizzly BRM 4210-20 Lawn Mower does not turn?
If the blade on your Grizzly Lawn Mower isn't turning, it might be blocked with grass. Remove the grass. If that's not the case, the blade might not be installed correctly, have the blade installed by a specialist workshop.
General| Type | Walk behind lawn mower |
|---|---|
| Motor type | V-twin cylinders OHV |
| Torque (max) | 45 N⋅m |
| Cutting width | 420 mm |
| Product color | Black, Red, White |
| Uncertainty K | 1.5 m/s² |
| Cutting system | Rotary blades |
| Housing material | Steel |
| Number of wheels | 4 wheel(s) |
| Rotational speed | 2900 RPM |
| Maximum lawn area | - m² |
| Mulching function | - |
| Oil tank capacity | 0.4 L |
| Fuel tank capacity | 0.75 L |
| Vibration emission | 7 m/s² |
| Rear wheels diameter | 200 mm |
| Sound pressure level | 96 dB |
| Front wheels diameter | 170 mm |
| Maximum cutting height | 75 mm |
| Minimum cutting height | 25 mm |
| Grass collecting volume | 50 L |
| Engine number of strokes | 4 |
| Number of height positions | 5 |
| Cutting clearance adjustment | Yes |
| Motor power | 2.17 hp |
| Engine power | 1600 W |
| Power source | Gasoline |
Weight and Dimensions| Weight | 24000 g |
|---|
Congratulates the user and guarantees the equipment's functionality and quality.
Specifies the equipment's purpose for mowing lawns in domestic use and outlines restrictions.
References illustrations of principal functioning parts on designated pages.
Lists the items included with the lawnmower upon purchase.
Provides a numbered list of all components and parts of the lawnmower.
Describes the lawnmower's power source and key features.
Details essential safety features of the lawnmower.
Lists detailed technical data for the petrol lawnmower.
Explains the meaning of symbols used on the device and within the manual.
Pictorial representations of warnings and instructions on the equipment itself.
Graphic symbols used within the instruction manual to convey information.
Specific symbols related to fuel and oil filler caps for correct usage.
Symbols indicating warnings and precautions related to the fuel tank.
Indicates the procedure for priming the engine using the petrol pump.
Illustrates information regarding starting and stopping the motor.
Provides essential safety guidelines and warnings for operating the equipment.
Crucial warning about potential hazards from not following safety instructions.
General advice on reading instructions, seeking instruction, and paying attention.
Essential steps to take before starting operation for safety.
Guidelines for safe operation and avoidance of hazards during use.
Ensure all nuts, bolts and screws are tightened firmly.
Warning about storing fuel indoors due to fire risk.
Safety advice to prevent fire risk when storing the engine.
Precautions to prevent fire hazards by keeping the engine area clean.
Importance of regular checks for the grass catcher's functionality and condition.
Recommends replacing worn or damaged parts for continued safety.
Safety instruction for draining fuel outdoors to prevent fire risk.
Advice on careful handling and tool maintenance for better performance and safety.
Advises professional servicing for repairs not covered in the manual.
Storage guidelines for safety and equipment protection.
Guides the user through the first-time use procedures.
Warning about the danger of rotating blades during equipment work.
Step-by-step guide for assembling the handle grip rod.
Instructions for correctly fitting the grass collection box.
Safety warning against operating with incomplete installation of collection box or protection.
Procedure for adding engine oil and verifying the oil level.
Explains the function of the grass bag fill indicator.
Guidance on safely adding petrol to the lawnmower.
Critical warnings about the flammability and health hazards of petrol.
General instructions for operating the lawnmower.
Instructions for safely starting and stopping the lawnmower engine.
Provides guidance on how to use the equipment for mowing.
General advice for efficient and safe lawnmowing operation.
Guide on how to adjust the lawnmower's cutting height.
Details procedures for cleaning and maintaining the lawnmower.
Advises professional servicing for maintenance not detailed in the manual.
Critical safety step for maintenance: engine off, spark plug disconnected.
Safety measure to prevent burns from hot engine parts during maintenance.
Safety precaution for protecting hands when working with the blade.
Procedure for cleaning or replacing the air filter to ensure engine performance.
Guidance on maintaining the spark plug for optimal engine function.
Steps for draining and refilling the engine oil.
Instructions for blade maintenance, including professional sharpening or replacement.
Advice on carburetor adjustment, recommending specialist workshop.
Table outlining recommended maintenance tasks at different time intervals.
Guidelines and procedures for storing the lawnmower.
Guidelines for storing the equipment safely and effectively.
Instructions on how to fold the device for space-saving storage.
Specific advice for storing the equipment during the winter season.
Guidance on responsible disposal of the equipment and its parts.
Information on how and where to obtain spare parts and accessories.
Lists common problems, their possible causes, and recommended fault corrections.
Details the warranty period, exclusions, and terms for the equipment.
