Grizzly BRM 51-2 BSA - User Manual

Questions and Answers

L
Larry EricksonAug 13, 2025
Why won't my Grizzly BRM 51-2 BSA Lawn Mower engine start?
- T
  Timothy RojasAug 13, 2025
  If the Grizzly Lawn Mower engine won't start, possible causes include too little petrol in the tank (fill it with petrol), an incorrect starting sequence (follow the instructions for starting the engine), a spark plug connector not correctly attached (attach the spark plug connector), a sooted spark plug (clean, adjust, or replace it), or an incorrectly adjusted carburetor mix (have it adjusted by a specialist workshop).
J
Jordan HallAug 17, 2025
Why is my Grizzly BRM 51-2 BSA Lawn Mower engine not running at full power?
- K
  kathryn11Aug 17, 2025
  If your Grizzly Lawn Mower engine starts but doesn't run at full power, it could be due to a dirty air filter (replace it), an incorrectly adjusted carburetor mix (have it adjusted by a specialist workshop), or the gas lever not being in the correct position (adjust the gas lever to the correct position).
B
beverly82Aug 21, 2025
Why is my Grizzly BRM 51-2 BSA Lawn Mower engine overheating?
- J
  Joshua ChandlerAug 21, 2025
  If the Grizzly Lawn Mower engine overheats, it might be due to blocked ventilation holes (clean the ventilation slot), an incorrect spark plug (change the spark plug), or too little engine oil (fill with engine oil).
A
Adriana MooreAug 25, 2025
What to do if my Grizzly BRM 51-2 BSA engine splutters and stops?
- D
  Derek ClementsAug 26, 2025
  If the Grizzly Lawn Mower engine splutters and stops, it could be due to an incorrectly adjusted carburetor mix (have it adjusted by a specialist workshop) or a sooted spark plug (clean, adjust, or replace the spark plugs).
T
thammondAug 28, 2025
Why is my Grizzly BRM 51-2 BSA output unsatisfactory?
- N
  Nancy HarmonAug 28, 2025
  If the output of your Grizzly Lawn Mower is unsatisfactory or the engine is labouring, the grass might be too short or too long (change the cutting height), the blade might be blunt (have the blade sharpened or replaced by a specialist workshop), or the blade might be blocked with grass, the grass collection box might be full, or the ejection channel might be blocked (remove the grass).
G
Gloria MartinSep 1, 2025
What to do if the blade does not turn on my Grizzly BRM 51-2 BSA Lawn Mower?
- M
  Marcus TaylorSep 1, 2025
  If the blade of your Grizzly Lawn Mower does not turn, it could be blocked with grass (remove the grass) or not installed correctly (have the blade installed by a specialist workshop).
M
Molly RiceSep 5, 2025
What to do if the drive does not switch on my Grizzly BRM 51-2 BSA Lawn Mower?
- G
  Gregory PerezSep 5, 2025
  If the drive on your Grizzly Lawn Mower does not switch on, the Bowden cables might be misadjusted. To solve this, adjust the Bowden cables or have them adjusted by a specialist workshop.
P
patrick08Sep 8, 2025
Why is my Grizzly BRM 51-2 BSA Lawn Mower making abnormal noises?
- K
  Kyle PhillipsSep 9, 2025
  If your Grizzly Lawn Mower is making abnormal noises, rattling, or vibrations, the blade might not be installed correctly (have the blade installed by a specialist workshop) or the blade might be damaged.