Grizzly ARM 4038 Lion-Set

Questions and Answers

K
kelly60Aug 12, 2025
Why Grizzly ARM 4038 Lion-Set won't start?
- J
  Jeffrey ColemanAug 12, 2025
  Your Grizzly Lawn Mower might not start due to several reasons. The battery could be empty or not properly inserted; in this case, check the charge level. Ensure the contact chip is inserted. If the grass is too long, set a greater cut height and lift the front wheels slightly by pressing down on the handle bar. Defective start lever needs repair by customer services. Worn carbon brushes or a defective motor may also be the cause.
D
Daniel RogersAug 18, 2025
What to do if my Grizzly Lawn Mower result is unsatisfactory?
- T
  theresa13Aug 18, 2025
  If your Grizzly Lawn Mower provides unsatisfactory results or the motor labors, several factors could be responsible. The cut height might be too low; try setting a higher cut height. The blade may be blunt, requiring sharpening or replacement. Check if the blade area is blocked and clean the equipment if necessary. Also, ensure the blade is installed correctly.
K
kennedyalisonAug 27, 2025
How to fix strange noises from Grizzly ARM 4038 Lion-Set Lawn Mower?
- M
  Mrs. Alexis TravisAug 27, 2025
  Strange noises, rattling, or vibrations in your Grizzly Lawn Mower could be due to a loose blade screw. Tighten the blade screw to resolve this. Alternatively, the blade might be damaged and require replacement.
J
Jonathan ComptonSep 4, 2025
Why is my Grizzly Lawn Mower blade not rotating?
- J
  Joseph AllenSep 4, 2025
  The blade of your Grizzly Lawn Mower might not be rotating because it is blocked by grass. Remove the grass to allow free movement. Another possible reason is a loose blade screw; tighten the blade screw to secure it.