Grizzly BRM 46-160 H User Manual (English)

Questions and Answers:

G
Gerald GarciaAug 12, 2025
How to start a Grizzly Lawn Mower when the engine does not start?
- R
  Robert HouseAug 13, 2025
  If your Grizzly Lawn Mower's engine won't start, there are a few potential reasons: * The petrol tank may be too low. If this is the case, fill the tank with petrol. * The starting sequence may be incorrect. Refer to the "operation" section for the correct starting procedure. * The spark plug connector may not be correctly attached or the spark plug may be sooted. Attach the spark plug connector and clean, adjust, or replace the spark plug.
M
Margaret RogersAug 16, 2025
Why is my Grizzly BRM 46-160 H engine overheating?
- A
  Arthur WongAug 17, 2025
  If your Grizzly Lawn Mower engine is overheating, consider these possible causes: * The ventilation holes may be blocked. If this is the case, clean the ventilation slot. * The spark plug may be incorrect. If so, change the spark plug. * There may be too little engine oil. If this is the case, fill the engine with oil.
A
Audrey OliverAug 20, 2025
What to do if Grizzly BRM 46-160 H starts but doesn't run at full power?
- B
  Betty SnyderAug 20, 2025
  If your Grizzly Lawn Mower engine starts but the equipment doesn't run at full power, the air filter may be dirty. Replace the air filter to resolve this issue.
M
Michael OrtegaAug 25, 2025
Why is my Grizzly BRM 46-160 H engine smoking?
- T
  tracie91Aug 25, 2025
  If your Grizzly Lawn Mower engine is smoking, it could be due to: * A dirty air filter. Replace the air filter. * Too little engine oil. Add engine oil to the engine.
E
Eileen MasonAug 27, 2025
What to do if my Grizzly BRM 46-160 H engine splutters and stops?
- J
  Jonathan BrownAug 27, 2025
  If your Grizzly Lawn Mower engine sputters and stops, it might be due to: * An incorrectly adjusted carburetor mix. You should have the carburetor adjusted by a specialist workshop. * A sooted spark plug. Clean, adjust, or replace the spark plugs.
J
Jonathan AllenAug 31, 2025
Why is my Grizzly Lawn Mower's output unsatisfactory?
- H
  heathersolisAug 31, 2025
  If the output of your Grizzly Lawn Mower is unsatisfactory or the engine is laboring, the grass may be too short or too long. Change the cutting height to resolve this.
C
Christian BensonSep 4, 2025
What to do if the blade of my Grizzly BRM 46-160 H does not turn?
- D
  denise56Sep 4, 2025
  If the blade of your Grizzly Lawn Mower does not turn, it might be blocked with grass. Remove the grass to allow the blade to turn freely.
J
jenniferlynchSep 8, 2025
Why is my Grizzly BRM 46-160 H Lawn Mower making abnormal noises?
- A
  Adam WalkerSep 8, 2025
  If your Grizzly Lawn Mower is making abnormal noises, rattling, or vibrating, the blade may not be installed correctly. Have the blade installed by a specialist workshop.

Grizzly BRM 46-160 H Specifications

General

Cutting Width	46 cm
Engine Type	4-stroke
Engine Displacement	160 cc
Cutting Height Range	25-75 mm
Warranty	2 years
Cutting Height Adjustment	Central
Grass Collector Volume	60 L