To Next PageTo Next Page
Need help?Do you have a question about the Grizzly G0787 and is the answer not in the manual?
Details efforts to ensure accuracy in the manual, acknowledging potential differences from the actual machine.
Provides contact details for Grizzly Technical Support and Documentation Manager for questions.
Describes primary controls for the sanding belt and disc operation, including tension, ON/OFF, and tracking.
Describes components related to the work table, miter gauge, and dust collection.
Covers essential safety warnings, precautions, and advice for operating the machine safely.
Details safety precautions specific to the operation of disc and belt sanders.
Discusses requirements for power supply circuits before machine installation.
Explains amperage draw at full power and potential issues with overloading.
Lists specific voltage, frequency, phase, and circuit size needed for operation.
Details the importance of proper grounding and plug connections for electrical safety.
Provides guidelines and recommendations for using extension cords with the machine.
Instructions for carefully removing the machine from packaging and inspecting for damage.
A list of items included with the machine for setup verification.
Lists necessary tools and supplies not included with the machine.
Guidance on choosing a suitable location and workspace for the machine.
Instructions and options for securely attaching the machine to a workbench.
Step-by-step guide for assembling the machine components.
Information on connecting a dust collection system and recommended CFM.
Procedure to verify proper setup and safe operation before regular use.
Instructions on how to remove the key to prevent unauthorized operation.
Detailed procedures for performing sanding operations using the disc.
Steps to adjust the work table angle relative to the sanding disc.
Instructions for setting the miter gauge for angled sanding.
Guidance on best practices for stable and effective disc sanding.
Explanation of how to use the belt sander in horizontal and vertical positions.
Steps to change the angle of the sanding bed for different operations.
Procedure for operating the sander with the belt in a horizontal position.
Instructions for sanding concave curves using the sanding belt.
Guidance for operating the sander with the belt in a vertical position.
Steps for removing and installing new sandpaper discs.
Specific steps to detach the old sandpaper disc.
Detailed procedure for applying a new sandpaper disc.
Instructions for replacing the sanding belt.
Steps to ensure the sanding belt runs correctly on the rollers.
Recommended maintenance checks for optimal machine performance.
General instructions for cleaning and protecting the machine.
Method for cleaning clogged sandpaper belts and discs.
A guide to diagnosing and resolving common machine problems.
Procedure to ensure the work table is parallel to the sanding disc.
Steps to adjust the miter gauge for accurate angle readings.
Instructions for replacing the machine's drive belt.
Essential safety precautions when working with electrical wiring.
Visual representation of the machine's electrical connections.
Exploded view and parts list for identifying machine components.
Information regarding various labels and cosmetic parts on the machine.
General
