-28-
G1010 4" x 6" Metal-Cutting Bandsaw
Figure 37. Blades
SECTION 5: ACCESSORIES
Figure 39. H5408 Blade Tensioning Gauge.
H5408—Blade Tensioning Gauge
The Blade Tensioning Gauge ensures long blade
life, reduced blade breakage, and straight cutting
by indicating correct tension. A precision dial indi
-
cator provides you with a direct readout in PSI.
G5107—64 1/2 x 1/2 x .025 10 TPI Raker
G5108—64 1/2 x 1/2 x .025 14 TPI Raker
G5109—64 1/2 x 1/2 x .025 18 TPI Raker
G5110—64 1/2 x 1/2 x .025 24 TPI Raker
G5111—64 1/2 x 1/2 x .025 6-10 Variable Pitch
G5112—64 1/2 x 1/2 x .025 8-12 Variable Pitch
G5113—64 1/2 x 1/2 x .025 10-14 Variable Pitch
G5114—64 1/2 x 1/2 x .025 14-18 Variable Pitch
G5115—64 1/2 x 1/2 x .025 20-24 Variable Pitch
H5405—Lenox
®
Lube Tube
™
Lenox
®
Lube Tube
™
is a stick lubricant designed
to prevent heat buildup. Apply it directly to the
blade to improve overall blade life and productiv
-
ity. Can be used on ferrous and non-ferrous met
-
als. Biodegradeable, non-toxic, and non-staining
14.5 oz tube.
Figure 38. Lenox
®
Lube Tube
™
.
To Next Page
