To Next PageTo Next Page
Need help?Do you have a question about the GROUP SCS EV-301 and is the answer not in the manual?
Physical dimensions and mounting details for the EV-301 interface panel.
Physical dimensions and mounting details for the EV-301-P interface panel.
Physical dimensions and mounting details for the EV-601 interface panel.
Detailed specifications for the control panel's primary power supply.
Specifications for the output capabilities of motor channels.
Lists relevant industry standards and certifications the product adheres to.
Details on connecting and specifications for the EV-HE077 override switch.
Information on connecting Fire Alarm System (FAS) and smoke detectors.
Details for connecting wind/rain detectors, ventilation switches, feedback, and volt-free contacts.
Covers mechanical specs, general connection, and operation guidelines.
Specifies the required installation and environmental conditions for the panel.
Details input control times and technical data for lead acid batteries.
Describes the functionality and features of the EV-301/EV-601 interface panels.
Describes the functionality and features of the EV-301-P interface panel.
Explains the primary power supply operation of the EV-x01 system.
Details the emergency power supply system using lead acid batteries.
Describes control electronics, mains/emergency power switching.
Details the EV-HE077 override switch functionality and indicators.
Describes motor outputs and signal contact behaviour during emergency power.
Details status indicators and panel addressing configuration.
Explains battery backup management and the sleep mode function.
Details FAS input signal detection and programmable vent delays.
Describes vent output retriggering and the signal contact functions.
Lists various operating conditions and their definitions for the panel.
Explains the service timer function and its fault indication.
Describes how the panel handles alarms in SP Mode, including FAS, Override, Lockout.
Outlines the conditions and methods for resetting alarms in SP Mode.
Explains the default daily ventilation mode and its configuration via SW1 switches.
Details the continuous and dead-man vent functions for opening/closing.
Explains the gap ventilation function and its timer adjustment.
Details the timed ventilation function and its automatic closing after a set time.
Describes weather sensor input and the ECO mode for energy saving.
Covers panel start-up, master watchdog, and standalone mode for commissioning.
Describes how alarms are handled in EV Mode, including FAS and Override.
Outlines conditions and methods for resetting alarms in EV Mode.
Lists EV-HE077 commands and explains gap ventilation in EV Mode.
Provides step-by-step instructions for commissioning the EV-x01 interface panels.
Details the specific commissioning steps for the EV-301-P pressure sensor.
Shows an overview of connectors, DIP switches, and jumpers for wiring.
Illustrates the topology for natural ventilation systems in SP Mode.
Details the data wiring connections for various components in SP Mode.
Provides specific wiring details for components in SP Mode.
Illustrates the topology for addressable shaft systems in EV Mode.
Details the data wiring connections for various components in EV Mode.
Provides specific wiring details for components in EV Mode.
Details the specific connections for the EV-301-P pressure sensor.
Addresses common issues and their solutions for the EV-x01 system.
Provides EC and UK manufacturer's declarations of product compliance.
Lists the contact addresses for the system manufacturer and distributor.
General| Category | Control panel |
|---|---|
| Weight | 0.8 kg |
| Protection Class | IP65 |
| Power Supply | 24 VDC |
| Humidity | 5% to 95% RH, non-condensing |
