SCS_BA_EV-301_601_EN_12 groupscs.co.uk Date: 31.05.2023
Issue: 1.2 / 06.2023 info@groupscs.co.uk
Page 27
Appendix
11. Appendix
11.1. Manufacturer‘s declaration EC
We hereby declare that the product complies with
the applicable directives. The declaration of con-
formity can be read at the company‘s premises
and will be sent to you upon request. This declaration certies
that the product complies with the mentioned directives, but
does not represent any guarantee of the product‘s features.
This declaration loses its validity, if the product is modied
without seeking our prior authorisation.
11.2. EC manufacturer‘s declaration
( distributor)
The installer is responsible for the correct assembly or com-
missioning, the preparation of the declaration of conformity in
accordance with EU regulations and for axing the CE mar-
king. The CE marking must be positioned where it is visible.
11.3. Manufacturer‘s declaration UK
certies that the product complies with the mentioned regula-
tions, but does not represent any guarantee of the product‘s
features. This declaration loses its validity, if the product is
modied without seeking our prior authorisation.
We hereby declare that the product complies with
the applicable regulations. The declaration of con-
formity can be read at the company‘s premises and
will be sent to you upon request. This declaration
11.4. UK manufacturer‘s declaration
( distributor)
The installer is responsible for the correct assembly or com-
missioning, the preparation of the declaration of conformity
in accordance with UK regulations and for axing the UK
marking. The UKCA marking must be positioned where it is
visible.
11.5. Company address
11.5.1. System manufacturer (Germany)
SIMON PROtec Systems GmbH
Medienstraße 8
94036 Passau
Phone: +49 (0) 851 988 70 - 0
Fax: +49 (0) 851 988 70 - 70
E-Mail: info@simon-protec.com
Web: www.simon-protec.com
11.5.2. Group SCS
Group SCS
Capital Business Park
Parkway
Cardi CF3 2PZ
Phone: 0300 303 4104
E-Mail: info@groupscs.co.uk
Web: www.groupscs.co.uk