4
3
2.2 Symbol Conventions
Indicates an imminently hazardous situation which,if not avoid-
ed,will result in serious injury or death.
Indicates potentially hazardous situation which,if not avoided,
will result in serious injury or death.
Indicates potentially hazardous situation which,if not avoided,
will result in minor or moderate injury.
Indicates certain hazardous situation which,if not avoided,will
rusult in property damage.
Reminds operator to read installation manual before operating or
installing inverter.
2.3 Lable Description
High Voltage
Electric Shock
Inverter operating with high voltage,any
operation regarding inverter need to be done by
trained and authorized electrical technician.
Do not touch a running inverter cause it
generates high temperature on the case.
Connect inverter to grounding bar.
Residual voltage exists after the inverter is
powered off,it takes 5 minutes for the inverter
to discharge to the safe voltage.
Read the
installation
manual
Reminds operator to read installation manual
before operating or installing inverter.
Means this terminal is for DC side.
Means this terminal is for AC side.
The inverter complies with the requirements of
the applicable CE guidelines
Other：
•After you receiving the inverter please check the packing materials
for damage,if there is any damage please contact your supplier.
•The Max. PV input voltage should not exceed 1100V.
•For the disposed inverter,the consumer should dispose it according to
local disposal rules for electrical equipment waste.
CAUTION
NOTICE
WARNING
WARNING
DANGER
To Next Page
Loading...
Need help?
General