Basic Configuration of the MAX inverter
1. Configuration tool USB-WiFi
The small USB-WiFi is small tool for local configuration. Use USB-WiFi module and
ShinePhone can do the reading and setting via local WiFi network, no need
communication cable anymore.
2. Connection
After finished the inverter installation, then can go to the configuration step:
a. Connect the USB-WiFi stick to inverter USB port A, then turn on the AC breaker or
turn on DC switch, the inverter will powered on.
b. Enter smart phone WLAN Setting page, search the USB-WiFi network, connect to it, the WiFi
To Next Page
