Growatt MAX Series Manual

Basic Configuration of the MAX inverter
1. Configuration tool USB-WiFi
The small USB-WiFi is small tool for local configuration. Use USB-WiFi module and
ShinePhone can do the reading and setting via local WiFi network, no need
communication cable anymore.
2. Connection
After finished the inverter installation, then can go to the configuration step:
a. Connect the USB-WiFi stick to inverter USB port A, then turn on the AC breaker or
turn on DC switch, the inverter will powered on.
b. Enter smart phone WLAN Setting page, search the USB-WiFi network, connect to it, the WiFi

Growatt MAX Series Specifications

General

Max. DC Voltage	1100 V
MPPT Voltage Range	200-1000 V
Number of DC Inputs per MPPT	2
Nominal Grid Frequency	50/60 Hz
THDi	<3%
DC Switch	Yes
MPPT	Yes
Communication	WiFi, GPRS, Ethernet
Nominal AC Voltage	400 V
AC Voltage Range	310-480 V
Power Factor	0.8 leading ... 0.8 lagging
Operating Temperature Range	-25°C to +60°C