19
20
3.Push the threaded sleeve into the socket, Tighten up the cap on the terminal.
4.Finally, Push or screw the threaded sleeve to connection terminal until both are locked
tightly on the inverter.
5.To remove the AC connector, press the bayonet out of the slot with a small screwdriver
and pull it out,or unscrew the threaded sleeve,then pull it out.
Wire suggestion length
Conductor cross
section
Conductor cross
section
Max. cable length
Max. cable length
MIC 600TL-X
MIC 3300TL-X
MIC 2000TL-X
MIC 1000TL-XMIC 750TL-X
MIC 2500TL-X
MIC 1500TL-X
MIC 3000TL-X
2 mm² 14AWG
3.3 mm² 12AWG
92m
45m
72m 54m
36m
37m
27m
3.3 mm² 12AWG
5.2 mm² 10AWG
150m
73m
120m 90m
58m
61m
44m
Lock the housing
Lock the housing
Lock the housing
Unlock the housing
The Inverter Side
The Inverter Side
Unlock the housing
30m
48m
To Next Page
Loading...
