How do I troubleshoot Warning 400 on my Growatt MID 15KTL3-XH?
If your Growatt Inverter is displaying Warning 400, after shutdown, check the connection of the fan and replace the fan. If the error message persists, please contact Growatt support.
What to do if my Growatt MID 15KTL3-XH Inverter displays Error 309?
If your Growatt Inverter shows Error 309, check the grid frequency and restart the inverter. If the error message persists, please contact Growatt support.
What should I do if my Growatt MID 15KTL3-XH Inverter is showing Error 301?
If your Growatt Inverter displays Error 301, check the AC terminals. If the error message continues, contact Growatt support for further assistance.
How to fix Warning 306 on a Growatt Inverter?
To address Warning 306 on your Growatt Inverter, check the connection of the communication cable. If the error message persists, please contact Growatt support.
What should I do if my Growatt MID 15KTL3-XH displays Warning 605?
If your Growatt Inverter displays Warning 605, try restarting the inverter. If the error message persists, please contact Growatt support.
How to fix Warning 204 on a Growatt MID 15KTL3-XH Inverter?
If your Growatt Inverter is showing Warning 204, after shutdown, check the dry contact wiring. If the error message persists, please contact Growatt support.
What should I do if I see Warning 423 on my Growatt Inverter?
If your Growatt Inverter displays Warning 423, restart the inverter. If the error message persists, please contact Growatt support.
How to troubleshoot Error 202 on my Growatt MID 15KTL3-XH?
To address Error 202 on your Growatt Inverter, immediately disconnect the DC switch and check the voltage. If the fault code still exists after the normal voltage is restored, contact Growatt support.
What should I do if my Growatt MID 15KTL3-XH displays Warning 502?
If your Growatt Inverter shows Warning 502, check whether the grid voltage is out of range or whether the grid-connected voltage setting of the inverter is correct. Check whether the PV voltage is too high or too low. Restart the inverter. If the error message persists, please contact Growatt support.
What to do if my Growatt MID 15KTL3-XH Inverter is showing Warning 219?
If your Growatt Inverter displays Warning 219, restart the inverter. If the error message persists, please contact Growatt support.
Provides an overview of Growatt series hybrid inverters, detailing their design, capabilities, and key features.
Specifies the requirements for qualified and trained personnel authorized to perform electrical connections and operations.
Outlines critical safety instructions, warnings, and precautions for the installation, operation, and maintenance of the inverter.
Details the fundamental requirements for installing the inverter, including structural, environmental, and clearance needs.
Lists crucial precautions related to electrical connections, including high voltage and static electricity hazards.
Provides instructions and safety warnings for connecting the AC side of the inverter, including cable specifications.
Details the procedures and safety measures for connecting the DC side of the inverter, including PV module connections.
Describes the importance and method of grounding the inverter for safety and system protection.
Details the step-by-step procedure for safely powering on the inverter and its associated components.
Explains how error messages are displayed and the information needed for Growatt technical support.
Lists various system warnings, their descriptions, and recommended troubleshooting steps.
Details specific system error codes, their descriptions, and the corresponding troubleshooting actions.
General| Model | MID 15KTL3-XH |
|---|---|
| Rated Power | 15000 W |
| Max. DC Input Voltage | 1100 V |
| Nominal AC Power | 15000 W |
| Total Harmonic Distortion | < 3% |
| DC Connection Type | MC4 |
| Protection Class | I |
| Topology | Transformerless |
| Input Voltage Range | 200-1000 V |
| MPPT Voltage Range | 200-1000 V |
| Rated Output Power | 15000 W |
| Nominal AC Voltage | 230 V |
| Output Voltage Range | 180 V - 280 V |
| AC Voltage Range | 340 V - 480 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Operating Temperature Range | -25 °C - +60 °C |
| Number of MPPT | 2 |
| Number of MPP Trackers | 2 |
| Max DC Input Current per MPPT | 20 A |
| Max. Input Current per MPPT | 20 A |
| Cooling Method | Smart Air Cooling |
To Next Page