How do I troubleshoot Warning 400 on my Growatt MID 13KTL3-XH?
If your Growatt Inverter is displaying Warning 400, after shutdown, check the connection of the fan and replace the fan. If the error message persists, please contact Growatt support.
What to do if my Growatt Inverter displays Error 309?
If your Growatt Inverter shows Error 309, check the grid frequency and restart the inverter. If the error message persists, please contact Growatt support.
What should I do if my Growatt MID 13KTL3-XH Inverter is showing Error 301?
If your Growatt Inverter displays Error 301, check the AC terminals. If the error message continues, contact Growatt support for further assistance.
How to fix Warning 306 on a Growatt MID 13KTL3-XH Inverter?
To address Warning 306 on your Growatt Inverter, check the connection of the communication cable. If the error message persists, please contact Growatt support.
What should I do if my Growatt MID 13KTL3-XH Inverter displays Warning 605?
If your Growatt Inverter displays Warning 605, try restarting the inverter. If the error message persists, please contact Growatt support.
How to fix Warning 204 on a Growatt Inverter?
If your Growatt Inverter is showing Warning 204, after shutdown, check the dry contact wiring. If the error message persists, please contact Growatt support.
What should I do if I see Warning 423 on my Growatt MID 13KTL3-XH Inverter?
If your Growatt Inverter displays Warning 423, restart the inverter. If the error message persists, please contact Growatt support.
How to fix Error 204 on a Growatt MID 13KTL3-XH Inverter?
If your Growatt Inverter is showing Error 204, after shutdown, check the connection of the PV terminals and restart the inverter. If the error message persists, please contact Growatt support.
What should I do if my Growatt MID 13KTL3-XH displays Warning 502?
If your Growatt Inverter shows Warning 502, check whether the grid voltage is out of range or whether the grid-connected voltage setting of the inverter is correct. Check whether the PV voltage is too high or too low. Restart the inverter. If the error message persists, please contact Growatt support.
What to do if my Growatt MID 13KTL3-XH is showing Warning 219?
If your Growatt Inverter displays Warning 219, restart the inverter. If the error message persists, please contact Growatt support.
General safety guidelines and precautions for installation and operation.
Critical warnings related to the assembly and physical handling of the inverter.
Essential safety precautions for making electrical connections to the inverter.
Safety advice for operating the inverter and handling potential hazards.
General guidelines and prerequisites for installing the inverter safely and correctly.
Procedures for mounting the inverter onto a wall.
Step-by-step guide for securely attaching the mounting bracket.
Instructions for physically attaching the inverter to the installed bracket.
Essential safety measures to follow before and during electrical connections.
Detailed steps and warnings for connecting the AC output of the inverter.
Specifies recommended circuit breakers and the process for AC cable connection.
Instructions for connecting the DC input from photovoltaic panels.
Important warnings and specifications related to DC input wiring.
Guidelines for connecting a DC/DC box for battery integration.
Safety and polarity instructions for the DC/DC box connection.
Requirements and procedures for properly grounding the inverter.
Specific warnings about grounding and earth fault detection.
Steps to initiate and verify the inverter's operation.
Step-by-step instructions for safely starting up the inverter.
Step-by-step instructions for safely shutting down the inverter.
Information to gather when reporting an error message.
A list of system warnings and their corresponding troubleshooting steps.
A list of system errors and their corresponding troubleshooting steps.
To Next Page
General