How do I fix 'Communication fault M3 didn't receive SP-CT data' on my Growatt MID 10KTL3-X?
If your Growatt Inverter displays 'Communication fault M3 didn't receive SP-CT data', check the communication wire. If the error message persists, it is recommended to contact the manufacturer.
What to do if my Growatt Inverter displays 'No Utility'?
If your Growatt Inverter shows 'No Utility', first confirm if the grid is lost or not. If the error message persists, it is recommended to contact the manufacturer.
How to troubleshoot a 'No AC Connection' error on a Growatt Inverter?
If your Growatt Inverter shows 'No AC Connection', first shutdown the system and check the AC wiring. If the error message persists, it is recommended to contact the manufacturer.
What causes 'AC V Outrange' on a Growatt MID 10KTL3-X and how do I fix it?
If your Growatt Inverter indicates 'AC V Outrange', begin by checking the grid voltage. If the error message continues to appear even when the grid voltage is within the tolerable range, contact the manufacturer.
What should I do if my Growatt MID 10KTL3-X Inverter shows a 'Grid frequency outrange' error?
If your Growatt Inverter displays 'Grid frequency outrange', check if the frequency is within the specified range. If the error message persists, it is recommended to contact the manufacturer.
How to fix a 'PE abnormal' error on a Growatt Inverter?
If your Growatt Inverter displays 'PE abnormal', check the PE line to ensure it is making good contact. If the error message persists, contact the manufacturer.
What happens if the DC input voltage exceeds the maximum on a Growatt MID 10KTL3-X Inverter?
If your Growatt Inverter indicates that 'The DC input voltage is exceeding the maximum tolerable value', immediately disconnect the DC switch and check the voltage. If the fault code persists after the normal voltage is restored, contact the manufacturer.
How to fix 'String PID quick connect terminal detection error' on Growatt Inverter?
If your Growatt Inverter displays 'String PID quick connect terminal detection error', after shutdown, check the string terminal wiring. If the error message persists, it is recommended to contact the manufacturer.
What to do if Growatt Inverter reports 'Fan function abnormal'?
If your Growatt Inverter displays 'Fan function abnormal', after shutdown, check the fan connection and replace the fan. If the error message persists, it is recommended to contact the manufacturer.
How to troubleshoot a 'Communication fault' on a Growatt MID 10KTL3-X?
If your Growatt Inverter displays 'Communication fault', check the communication wire. If the error message persists, it is recommended to contact the manufacturer.
Outlines critical safety precautions and warnings for inverter installation and operation.
Lists fundamental requirements for safe and effective inverter mounting and placement.
Provides instructions and specifications for securely mounting the inverter on a wall.
Details the steps for physically hanging and securing the inverter onto its mount.
Highlights critical safety warnings related to electrical connections for the inverter.
Guides on making correct AC electrical connections to the inverter, including breaker requirements.
Explains how to safely connect DC input from PV modules, including voltage and current limits.
Explains how error messages are displayed and what information to provide for support.
Lists warning and error codes with fault descriptions and suggested corrective actions.
General| Model | MID 10KTL3-X |
|---|---|
| Max. DC Input Voltage | 1100 V |
| Nominal DC Voltage | 600 V |
| Number of MPP Trackers | 2 |
| Rated Output Current | 14.5 A |
| AC Grid Frequency | 50 / 60 Hz |
| Total Harmonic Distortion (THD) | < 3% |
| DC Switch | Yes |
| Topology | Transformerless |
| Protection Degree | IP65 |
| Max. DC Power | 15 kW |
| MPPT Voltage Range | 160 - 1000 V |
| Rated Power | 10 kW |
| Max. AC Power | 11000 W |
| Nominal AC Voltage | 230 V |
| AC Output Frequency | 50/60 Hz |
| Power Factor | 0.8 leading - 0.8 lagging |
| Protection Class | Class I |
| Overvoltage Category | II |
| Operating Temperature Range | -25°C to 60°C |
To Next Page