6.3.2 DC connection area
Fig 6.6
Fig 6.7
Fig 6.8
Fig 6.9
Fig 6.10 out side GET
Fig 6.11 inside GET
6.3.3 Communication connection area
6.3.4 RGM connection area
the positon of screw
6.4 Grounding
AC Grounding
Grounding Electrode Terminal (GET)
It must be connected to the AC grounding conductor of the power distribution grid via
the ground terminal (PE). The AC input and AC output circuits are isolated from the
enclosure and system grounding, if required by Section 250 of the National Electrical
Code, ANSI/NFPA 70.
A grounding electrode terminal may be required to local regulations.
25
26
To Next Page
Loading...
