23
24
6.5 Connecting the Bidirectional DC/DC Box
The MIN TL-XH single-phase inverter has one independent BAT input : BAT+/BAT-
connecting to the output of Bidirectional DC/DC Box.
Notice that the connectors are in paired (male and female connectors). The connectors
for Bidirectional DC/DC Box and inverters are VP-D4/MC4 connectors;
6.5.1 Conditions for Bidirectional DC/DC Box
6.5.2 Connecting the Bidirectional DC/DC Box
Connection of BAT input terminal
WARNING
DANGER
Danger to life due to lethal voltages!
Before connecting the Bidirectional DC/DC Box, ensure that the
Box do not connect any power supply. NEVER connect or
disconnect the BAT connectors under load.
Forbidden to reverse the positive and negative poles of the
Bidirectional DC/DC Box and the inverter.
Improper operation during the wiring process can cause fatal
injury to operator or unrecoverable damage to the inverter.
Only qualified personnel can perform the wiring work.
*
To Next Page
Loading...
