3.2. Setting through ShineServer
If the inverter is monitored online via the Growatt monitoring system, you can setting
the mode and time periods via ShineServer.
First login to ShineServer, click "Plant" and
go to the "Device List" interface, select to enter "Min", you can see the inverter list.
Select the inverter and click the setting icon to enter the setting interface.
Figure.2. Indication of setting the inverter on the ShineServer
Select the time period you want to set, select the priority mode and fill in the end time
and start time. Finally, select whether to enable it. After entering the password, click
Save to successfully set it.
Figure.3. Indication of setting the mode and time periods on shineserver
To Next Page
Loading...
