Growatt MIN 6000TL-XH - Safety; 1.5 Glossary; 2.1 Intended Use; 2.2 Qualification of Skilled Person

3.3. Setting through ShinePhone
If the inverter is monitored online via the Growatt monitoring system, you can set
mode and time periods via the ShinePhone. First login to the shinephone, click on
"Plant" to see the inverter list. Select the inverter, enter the details page and click the
“Control” to enter the setting interface.
Figure.4. Indication of finding the setting interface on ShinePhone
Select “Set the priority of charging and discharging period”, enter the password, select
the time period, the priority mode, then select end time and start time, finally select
whether to enable it. Click “Yes” to set it successfully.