Growatt MOD 6000TL3-X User Manual

37
38
9.3.5 Check firmware version,Region,Country/Area and Power Quality Response
Modes (Australia model only)
The inverter power output will vary in response to the AC grid voltage. This is switched
on by default.This function belongs to advanced function, if you need to change, please
contact the after-sales operation and maintenance to make adjustments.
Reset Country
Country/Aera
VDE0126
Country/Aera
xxxxxxx
Set OK
Set parameter
General
Advanced
Password
***
Reset Region
Set Region
A B C
NO
YES
Set OK
Set parameter
General
Advanced
Password
***
Reset PQRM
Set PQRM
Volt-Var
Set PQRM
xxxxxxx
Set OK
Set parameter
General
Advanced
Password
***
Set Region
A B C
Country/Aera
Australia
Set PQRM
Disable Enable
9.3.6 Generation & Export limitation control and Power Sensor setting
(Australia model only)
Single touch to switch display or make the number +1.
Double touch to confirm you setting.
Control type:
SW stands for enabling software limit control function
HW stands for enabling hardware limit control function
Both stands for enabling software and hardware limit control function at the same time.
Generation limit
OFF ON
Control type
SW HW Both
Set OK
Set parameter
General
Advanced
Password
***
Limit Rate
XXX.X%
Export limit
OFF ON
Meter
CT
Limit Rate
XXX.X%
Set parameter
General
Advanced
Password
***
Control type
SW HW Both
Set OK

Growatt MOD 6000TL3-X Specifications

General

Brand	Growatt
Model	MOD 6000TL3-X
Category	Inverter
Language	English