Growatt TL3-X Series - Specification

Model
Specifications
MOD
9000TL3-
X-AU
MOD
10KTL3-
X-AU
MOD
11KTL3-
X-AU
MOD
12KTL3-X
MOD
13KTL3-X
MOD
15KTL3-X
Protection devices
DC reverse-polarity
protection
YES
DC switch
YES
DC Surge protection
typeII OPT
Insulation resistance
monitoring
YES
AC surge protection
typeII OPT
AC short-circuit
protection
YES
Grid monitoring
YES
Anti-islanding protection
YES
Residual-current
monitoring unit
YES
String Fuse protection
YES
String monitoring
OPT
AFCI protection
OPT
General data
Dimensions (W / H / D) in
mm
425*381* 178mm
Weight
16.5kg
Operating temperature
range
-25°C ... +60°C
(>45°CDerating)
Noise emission (typical)
 35dB(A)
Altitude
4000m
Internal consumption at
night
1W
Topology
Transformerless
Cooling
Natural heat dissipation
Electronics protection
degree
Ip66
Relative humidity
0~100%
DC connection
H4/MC4(OPT)
AC connection
Waterproof PG head+OT terminal or quick connect terminal
Interfaces
Display
OLED+LED
USB/RS485
YES
WIFI/GPRS/4G/RF/LAN
OPT
52
51
17.2 Torque
Shell cover screw
22kgf.cm
AC terminal block
8kgf.cm
AC waterproof cover fixing screw
8kgf.cm
Security screws on the wall mount
12kgf.cm
Ground screw
12kgf.cm
17.3 Annex
Product attachments can be selected from the table below:
Name
Brief
Shine GPRS-X
USB interface GPRS monitoring module
Shine WIFI-X
USB interface WIFI monitoring module
Shine 4G-X
USB interface 4G monitoring module
Shine RF-X
USB interface RF monitoring module
Shine LAN-X
USB interface LAN monitoring module
The inverter can be repaired on site or transported to the Growatt service center for
repair, or it can be replaced with a new one based on the model and service life of the
machine.
The warranty does not include the cost of recovery and transportation of faulty
equipment. The cost of installation or reinstallation of malfunctioning equipment should
also be clearly excluded from other related logistics and processing costs incurred by
warranty claims related to various aspects.