Need help?Do you have a question about the Grundfos ALPHA2 25-80 130 and is the answer not in the manual?
General| Model | ALPHA2 25-80 130 |
|---|---|
| Category | Water Pump |
| Max Head | 8 m |
| Connection Size | 1 1/2 inch |
| Installation Length | 130 mm |
| Power Supply | 230 V, 50/60 Hz |
| Energy Efficiency Index (EEI) | ≤ 0.17 |
| Temperature Range | 2°C to 110°C |
| Max Operating Pressure | 10 bar |
| Protection Class | IP42 |
| Weight | 2.6 kg |
| Material | Cast iron |
| Pump Type | Circulator |
Explains hazard and safety symbols used throughout the manual.
Covers the physical mounting of the pump in the system.
Details how to orient the control box for optimal installation.
Initial steps and checks after the first power-up.
Identifies and describes the components of the pump's control panel.
Explains the information shown on the pump's digital display.
Describes the LED indicators for pump performance settings.
Overview of different pump operating modes and settings.
Explains the relationship between pump settings and performance.
How to enable and use the automatic night setback feature.
Lists key technical specifications and operating parameters of the pump.
Explains how to interpret the pump's performance curves.
Displays performance curves for ALPHAx XX-40 (N) models.
Displays performance curves for ALPHAx XX-50 (N) models.
Displays performance curves for ALPHAx XX-60 (N) models.
Displays performance curves for ALPHAx 25-40 A models.
Displays performance curves for ALPHAx 25-60 A models.
Displays performance curves for ALPHAx XX-80 (N) models.
Troubleshooting guide for ALPHA SOLAR pump alarms indicated by LEDs.
To Next Page