Need help?Do you have a question about the Grundfos ALPHA2 32-60 180 and is the answer not in the manual?
General| Model | ALPHA2 32-60 180 |
|---|---|
| Category | Water Pump |
| Type | Circulator Pump |
| Max Head | 6 m |
| Port to Port Length | 180 mm |
| Liquid Temperature Range | 2°C to 110°C |
| Max Operating Pressure | 10 bar |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Ambient Temperature Range | 0°C to 40°C |
| Housing Material | Cast Iron |
| Impeller Material | Composite |
| Protection Class | IP42 |
| Control Type | Proportional Pressure, Constant Pressure, and Constant Curve |
Covers the physical mounting procedures for the pump.
Details how to orient the control box for optimal function.
Specific control box orientations for ALPHA SOLAR models.
Step-by-step guide for connecting the power supply plug.
Electrical installation specifics for ALPHA SOLAR models.
Connecting the ALPHA SOLAR to the power supply.
Prerequisites and checks before initial operation.
Identifies and describes components on the pump's control panel.
Explains the information shown on the pump's digital display.
Describes the light fields indicating pump settings.
Recommended settings for two-pipe heating systems.
Recommended settings for one-pipe heating systems.
Recommended settings for underfloor heating systems.
Recommended settings for domestic hot-water systems.
How to use the automatic night setback feature.
Explains the pump's protection against dry operation.
Troubleshooting steps when the pump fails to start.
Comprehensive list of technical specifications and ratings.
Physical dimensions and diagrams for specific pump models.
To Next Page