Need help?Do you have a question about the Grundfos ALPHA2 15-55SF SS 115 and is the answer not in the manual?
General| Model | ALPHA2 15-55SF SS 115 |
|---|---|
| Category | Water Pump |
| Type | Circulator Pump |
| Power Supply | 115V |
| Material | Stainless Steel |
| Operating Temperature Range | 36°F to 230°F |
| Maximum Operating Pressure | 145 psi |
| Protection Class | IP42 |
| Head Range | 0-18 ft |
| Maximum Head | 18 ft |
Explains hazard symbols (DANGER, WARNING, CAUTION) and their meanings for safety.
Guides on checking the received product against order and verifying voltage/frequency.
Lists items included in the product box for verification.
Advice for efficient system setup and pump operation during installation.
Details pipe connection, flushing, check valve, and pump orientation.
Step-by-step guide for rotating the pump's power head for optimal installation.
Instructions on reducing heat loss using insulating shells for energy efficiency.
Safety guidelines and steps for making electrical connections to the pump.
Specific instructions for connecting the pump using its supplied power cord.
Wiring procedure for connecting the pump via its terminal box.
Guides on system venting and initial pump power-up.
Overview of the ALPHA2 circulator's features, benefits, and control panel.
Lists recommended applications for the ALPHA2 pump in heating and cooling systems.
Details compatible liquids, temperature limits, and cautions for various fluids.
Information on using glycol mixtures, including concentration and maintenance.
Explains the meaning of data found on the product's nameplate.
Deciphers the pump model designation and its encoded specifications.
Lists certifications and regulatory compliance statements for the product.
Identifies and explains each component of the pump's control panel.
Details the pump's digital display and the meaning of various indicator lights.
Guides on changing pump settings and selecting operating modes.
Recommends optimal control modes for different types of heating and cooling systems.
Details AUTOADAPT, constant pressure, constant speed, and manual summer modes.
Troubleshooting steps for pump startup issues and lack of operation.
Identifies causes and remedies for noise originating within the heating system.
Specific steps to diagnose and resolve noise problems originating from the pump itself.
Addresses issues where the pump fails to deliver adequate heat to the system.
Details supply voltage, enclosure class, pressure, and temperature limits.
Information on glycol concentration, flow indication, and check valve advice.
Details curve conditions and approximate power consumption by speed setting.
To Next Page