Need help?Do you have a question about the Grundfos ALPHA1 Series and is the answer not in the manual?
General| Series | ALPHA1 |
|---|---|
| Voltage | 230 V |
| Temperature Range | 2°C to 110°C |
| Max Operating Pressure | 10 bar |
| Enclosure Class | IP42 |
| Insulation Class | F |
| Type | Circulation Pump |
| Frequency | 50 Hz |
| EEI (Energy Efficiency Index) | 0.20 |
| Material | Cast iron |
| Connection Size | 1" |
Details on connecting the pump to the piping system.
Instructions for rotating the pump's motor and control unit.
Guidance on wiring the pump for power.
Procedure for removing air from the pump and system.
Steps for initial operation after installation.
Instructions on how to adjust pump settings.
Describes the pump's operating modes and control logic.
To Next Page