Need help?Do you have a question about the Grundfos ALPHA1 B and is the answer not in the manual?
General| Pump Type | Circulator |
|---|---|
| Energy Efficiency Index (EEI) | ≤ 0.20 |
| Power Supply | 230 V, 50/60 Hz |
| Liquid Temperature Range | 2°C to 95°C |
| Protection Class | IP42 |
| Max Operating Pressure | 10 bar |
| Enclosure class | IP42 |
| Insulation class | F |
| Flow Rate | 3.5 m³/h |
| Connection Size | G 1 1/2 |
| Port-to-port length | 130 mm |
Details the symbols and statements indicating potential hazards during use.
Provides instructions for the physical mounting and installation of the pump in the system.
Step-by-step guide on how to physically rotate the pump's control box.
Detailed steps for connecting the power cable to the pump's plug.
Guidance on how to remove air from the pump and system for proper operation.
Describes the suitable systems and uses for the ALPHA1 pump.
Specifies the types of liquids that can be safely pumped by the ALPHA1.
Describes how the LED indicators show the selected pump performance setting.
Details the different operating modes available for the pump.
Explains the relationship between pump settings and performance curves.
Lists all technical specifications, operating limits, and conditions for the pump.
Displays the performance and power curves for the ALPHA1 XX-40 (N) model.
To Next Page