Need help?Do you have a question about the Grundfos ALPHA1 L and is the answer not in the manual?
General| Pump Type | Circulator Pump |
|---|---|
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Liquid Temperature Range | 2°C to 110°C |
| Protection Class | IP42 |
| Max Operating Pressure | 10 bar |
| Insulation Class | F |
| Connection Size | G 1 1/2 |
| Installation Length | 180 mm |
| Energy Efficiency Index (EEI) | ≤ 0.20 |
Explains safety symbols (DANGER, WARNING, CAUTION) and their meaning.
Highlights important notes and provides tips for easier operation.
Instructions for checking the product upon delivery and verifying its condition.
Lists the items included in the product package, such as pump, plug, and gaskets.
Details the steps for physically mounting the pump, including orientation and fitting.
Specifies acceptable and unacceptable mounting positions for the pump.
Describes how to position the pump's control box for optimal access and operation.
Guides on how to safely connect the pump to the electrical power supply.
Explains how to reduce heat loss by insulating the pump and pipe with shells.
Ensures system is filled and vented before pump operation.
Procedure for turning on the pump and initial operation.
Steps to remove trapped air pockets from the pump and system for quiet operation.
Overview of the ALPHA1 L pump's features and benefits for heating systems.
Lists suitable systems and scenarios for using the ALPHA1 L circulator pump.
Specifies suitable liquids and precautions for handling flammable or corrosive fluids.
Details the information found on the pump's nameplate for identification.
Information on available unions and valve kits for pump installation.
Details on optional insulating shells for reducing heat loss.
Information on the installer plug and power cable adapters.
Details on connecting the control signal cable via a mini superseal plug.
Description of the pump's operating panel, buttons, and LED indicators.
Overview of different pump control modes like constant curve and radiator heating.
Explains how the pump is controlled by a digital low-voltage pulse-width modulation (PWM) signal.
Details the PWM input signal behavior for heating applications.
Illustrates how pump settings affect performance curves.
Guide to adjusting pump settings using the operating panel button.
Instructions for enabling external control mode via PWM signal.
Steps for safely removing the pump from the system.
Procedure for safely disconnecting the power supply plug from the pump.
A table listing common alarms, their status, and solutions for troubleshooting.
Instructions on how to unblock a seized pump shaft using the deblocking device.
Specifies operating parameters like sound pressure, humidity, and system pressure.
Describes pump behavior and alarms under reduced voltage conditions.
Provides detailed physical dimensions for specific ALPHA1 L pump models.
Provides detailed physical dimensions for the ALPHA1 L 25-65 pump model.
Explains how to interpret pump performance curves and power curves.
Outlines the conditions and assumptions under which the performance curves are valid.
Graphical representation of head, flow, and power for ALPHA1 L XX-40.
Graphical representation of head, flow, and power for ALPHA1 L XX-60.
Graphical representation of head, flow, and power for ALPHA1 L XX-65.
Graphical representation of head, flow, and power for ALPHA1 L XX-80.
Guidelines for environmentally sound disposal of the pump and its components.
To Next Page
