English (GB)
23
11.2 Insulating shells
The pump is supplied with two insulating shells. The insulating
shells, which are tailored to the individual pump type, enclose the
entire pump housing. The insulating shells are easy to fit around
the pump. See fig. 31.
Fig. 31 Insulating shells
11.3 ALPHA plugs
* This special cable with an active built-in NTC protection circuit
reduces possible inrush currents. To be used in case of, for
instance, poor quality of relay components that are sensitive to
inrush current.
12. Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company
or service workshop.
The crossed-out wheelie bin symbol on a product
means that it must be disposed of separately from
household waste. When a product marked with this
symbol reaches its end of life, take it to a collection
point designated by the local waste disposal
authorities. The separate collection and recycling of such
products will help protect the environment and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.
Pump type Product number
ALPHA1 XX-XX 130 98091786
ALPHA1 XX-XX 180 98091787
TM06 9093 4317TM06 5823 0216
Pos. Description
Product
number
1
ALPHA straight plug, standard plug
connector, complete
98284561
2
ALPHA angle plug, standard angle plug
connection, complete
98610291
3
ALPHA plug, 90 ° bend to the left,
including 4 m cable
96884669
*
ALPHA plug, 90 ° bend to the left,
including 1 m cable and integrated NTC
protection resistor
97844632
To Next Page
Loading...
Need help?
General
