Grundfos APG Series - Contaminated Pumps; Oil; Service Kits

English (GB)
9
Fig. 5 Exploded view
9.2 Service kits
9.3 Oil
1 litre of oil, type Shell Ondina X420.
Product number: 96586753.
9.4 Contaminated pumps
If Grundfos is requested to service the pump,
Grundfos must be contacted with details about the
pumped liquid, etc. before the pump is returned for
service. Otherwise Grundfos can refuse to accept
the pump for service.
Possible costs of returning the pump to the customer
are paid by the customer.
TM01 7812 4899
Pos. Component
23 Cutter head
50 Cutting ring
101 Pump housing
162 Suction cover
230 Impeller
560 Guide pin
412.01 O-ring
900.01 Screw
900.02 Screw
904 Threaded pin
914.01 Screw
The service kit for APG
pumps up to and
including 3.7 kW
includes:
1 shaft seal kit
1 O-ring kit
1 cable entry kit.
The service kit for APG
pumps of 4.8 kW and up
includes:
1 cutter kit
1 O-ring kit
1 shaft seal kit
1 cable entry kit.
50 Hz pumps
APG.50.09, 11 and 12 96003308
APG.50.09.3Ex and 11.1Ex 96003300
APG.50.17, 18 and 19 96003309
APG.50.19.3Ex 96003310
APG.50.31 96003311
APG.50.31.3Ex 96003310
APG.50.48.3(Ex) 96843315
APG.50.65.3(Ex) 96843315
APG.50.92.3(Ex) 96843315
APG.50.48.3(Ex) with moisture sensor 96843315
APG.50.65.3(Ex) with moisture sensor 96843315
APG.50.92.3(Ex) with moisture sensor 96843315
60 Hz pumps
APG.50.11 and 12 96003308
APG.50.18 and 19 96003309
APG.50.29, 30 and 33 96003311
Caution
If used for a liquid which is injurious to
health or toxic, the pump will be classified
as contaminated.