101 All Pumps Set to o Zone A o Other ( )
104 Alarm Suppression o On o Off
105 Pump Communication o On o Off
111 Configuration Pre-Setting
o 8 With Pre-Pressure Monitoring o Other
( )
200 Set-point Max _______
201 Clock Program - See Below
202 Set-point Influence o On o Off
202 Set-point Influence ____%
204 System Time _____ seconds
205 Min Sequence _____seconds
206 Medium Sequence* ______seconds
207 On/Off Band _______
208 Pump Change o On o Off
209 Pump Change Time ________
212 Zone Name _________
213 Measuring Unit ________
214 Control Function o Normal o Inverse
219 Discharge Pressure Transducer (See Next Page)
216 Pre-Pressure Measuring o On o Off
220 Suction Pressure Transducer (See Next Page)
217 External Influence o Off o Ext. (See Below)
222 Input 4 o Off o Remote On/Off o Reduced Op. o Fire Fight
235 Hydraulic o Parallel o Series
226 Standby Pumps _____
227 Pump Priority (See Next Page)
228 Max. Limit (Discharge) _____
229 Min. Limit (Discharge) _____
230 Min. Limit Operation o On o Off
231 Min. Pre-Pressure ______
232 Maximum Pump Head (See Next Page)
300 Zone o On o Off o Local o Max
*Service Code Entry required
PMU factory settings
16
To Next Page
Loading...
